1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
|
# SPDX-License-Identifier: LGPL-3.0-or-later
# Copyright (C) 2020 Daniel Thompson
def nop():
pass
schedule = nop
def _callback(obj):
schedule()
# Start measuring time (and feeding the watchdog) before *anything* else
from machine import RTCounter
from drivers.nrf_rtc import RTC
rtc = RTC(RTCounter(1, mode=RTCounter.PERIODIC, period=1, callback=_callback))
rtc.counter.start()
import os
import time
import draw565
from machine import I2C
from machine import Pin
#from machine import Signal
from machine import SPI
from drivers.battery import Battery
from drivers.bma421 import BMA421
from drivers.touch import TouchButton
from drivers.hrs3300 import HRS3300
from drivers.signal import Signal
from drivers.st7789 import ST7789_SPI
from drivers.vibrator import Vibrator
from flash.flash_spi import FLASH
from ubluepy import uart_connected as connected
class Backlight(object):
lo = Pin("BL_LO", Pin.OUT, value=0)
mid = Pin("BL_MID", Pin.OUT, value=1)
hi = Pin("BL_HI", Pin.OUT, value=1)
def __init__(self, level=1):
self.set(level)
def set(self, level):
hi = 1
mid = 1
lo = 0
if level >= 3:
hi = 0
mid = 0
elif level == 2:
hi = 0
elif level == 1:
mid = 0
self.hi(hi)
self.mid(mid)
self.lo(lo)
# Setup the display (and manage the backlight)
backlight = Backlight(0)
spi = SPI(0)
spi.init(polarity=1, phase=1, baudrate=8000000)
display = ST7789_SPI(240, 240, spi,
cs=Pin("DISP_CS", Pin.OUT),
dc=Pin("DISP_DC", Pin.OUT),
res=Pin("DISP_RST", Pin.OUT))
drawable = draw565.Draw565(display)
def boot_msg(s):
drawable.string(s, 0, 108, width=240)
if safe_mode:
time.sleep_ms(500)
safe_mode = True
boot_msg("Init button")
button = Pin('BUTTON', Pin.IN)
safe_mode = button.value()
if safe_mode:
backlight.set(2)
time.sleep(1)
try:
# Setup the last few bits and pieces
boot_msg("Init battery")
battery = Battery(
Pin('BATTERY', Pin.IN),
Signal(Pin('CHARGING', Pin.IN), invert=True),
Signal(Pin('USB_PWR', Pin.IN), invert=True))
boot_msg("Init I2C")
i2c = I2C(1, scl='I2C_SCL', sda='I2C_SDA')
boot_msg("Init BMA421")
accel = BMA421(i2c)
boot_msg("Init HRS3300")
hrs = HRS3300(i2c)
boot_msg("Init touch")
touch = TouchButton(Pin('TP_INT', Pin.IN),
Pin('TP_RST', Pin.OUT, value=0), _callback)
boot_msg("Init motor")
vibrator = Vibrator(Pin('MOTOR', Pin.OUT, value=0), active_low=True)
# Release flash from deep power-down
boot_msg("Wake SPINOR")
nor_cs = Pin('NOR_CS', Pin.OUT, value=1)
nor_cs(0)
spi.write('\xAB')
nor_cs(1)
# Mount the filesystem
boot_msg("Init SPINOR")
flash = FLASH(spi, (nor_cs,))
try:
boot_msg("Mount FS")
os.mount(flash, '/flash')
except AttributeError:
# Format the filesystem (and provide a default version of main.py)
boot_msg("Format FS")
os.VfsLfs2.mkfs(flash)
boot_msg("Retry mount FS")
os.mount(flash,'/flash')
boot_msg("Write main.py")
with open('/flash/main.py', 'w') as f:
f.write('''\
#include('main.py')
''')
# Only change directory if the button is not pressed (this will
# allow us access to fix any problems with main.py)!
if not safe_mode:
boot_msg("Enter /flash")
os.chdir('/flash')
boot_msg("Run main.py")
else:
boot_msg("Safe mode")
except:
drawable.string("FAILED", 0, 136, width=240)
backlight.set(2)
|
