wasp: Automatically generate watch.py for PineTime

This should ensure that main.py is always up to date.

1 files changed, 0 insertions, 99 deletions

diff --git a/wasp/boards/pinetime/watch.py b/wasp/boards/pinetime/watch.py
deleted file mode 100644
index 1caeea5..0000000
--- a/wasp/boards/pinetime/watch.py
+++ /dev/null
@@ -1,99 +0,0 @@
-# SPDX-License-Identifier: LGPL-3.0-or-later
-# Copyright (C) 2020 Daniel Thompson
-
-# Start measuring time (and feeding the watchdog) before *anything* else
-from machine import RTCounter
-from drivers.nrf_rtc import RTC
-rtc = RTC(RTCounter(1, mode=RTCounter.PERIODIC))
-rtc.counter.start()
-
-import os
-import time
-
-import draw565
-
-from machine import I2C
-from machine import Pin
-#from machine import Signal
-from machine import SPI
-
-from drivers.battery import Battery
-from drivers.cst816s import CST816S
-from drivers.signal import Signal
-from drivers.st7789 import ST7789_SPI
-from drivers.vibrator import Vibrator
-from flash.flash_spi import FLASH
-
-class Backlight(object):
-    lo = Pin("BL_LO", Pin.OUT, value=0)
-    mid = Pin("BL_MID", Pin.OUT, value=1)
-    hi = Pin("BL_HI", Pin.OUT, value=1)
-
-    def __init__(self, level=1):
-        self.set(level)
-
-    def set(self, level):
-        hi = 1
-        mid = 1
-        lo = 1
-
-        if level >= 3:
-            hi = 0
-        elif level == 2:
-            mid = 0
-        elif level == 1:
-            lo = 0
-
-        self.hi(hi)
-        self.mid(mid)
-        self.lo(lo)
-
-# Setup the display (and manage the backlight)
-backlight = Backlight(0)
-spi = SPI(0)
-spi.init(polarity=1, phase=1, baudrate=8000000)
-display = ST7789_SPI(240, 240, spi,
-        cs=Pin("DISP_CS", Pin.OUT),
-        dc=Pin("DISP_DC", Pin.OUT),
-        res=Pin("DISP_RST", Pin.OUT))
-drawable = draw565.Draw565(display)
-
-# Setup the last few bits and pieces
-battery = Battery(
-        Pin('BATTERY', Pin.IN),
-        Signal(Pin('CHARGING', Pin.IN), invert=True),
-        Signal(Pin('USB_PWR', Pin.IN), invert=True))
-button = Pin('BUTTON', Pin.IN)
-i2c = I2C(1, scl='I2C_SCL', sda='I2C_SDA')
-touch = CST816S(i2c)
-vibrator = Vibrator(Pin('MOTOR', Pin.OUT, value=0), active_low=True)
-
-# Release flash from deep power-down
-nor_cs = Pin('NOR_CS', Pin.OUT, value=1)
-nor_cs(0)
-spi.write('\xAB')
-nor_cs(1)
-
-# Mount the filesystem
-flash = FLASH(spi, (Pin('NOR_CS', Pin.OUT, value=1),))
-try:
-    os.mount(flash, '/flash')
-except AttributeError:
-    # Format the filesystem (and provide a default version of main.py)
-    os.VfsLfs2.mkfs(flash)
-    os.mount(flash,'/flash')
-    with open('/flash/main.py', 'w') as f:
-        f.write('''\
-import manager
-wasp = manager.Manager(watch)
-wasp.run()
-''')
-
-# Only change directory if the button is not pressed (this will
-# allow us access to fix any problems with main.py)!
-if not button.value():
-    os.chdir('/flash')
-    backlight.set(1)
-else:
-    display.poweroff()
-