summaryrefslogtreecommitdiff
path: root/src/libs/mynewt-nimble/apps/bleprph/src/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/libs/mynewt-nimble/apps/bleprph/src/main.c')
-rw-r--r--src/libs/mynewt-nimble/apps/bleprph/src/main.c359
1 files changed, 359 insertions, 0 deletions
diff --git a/src/libs/mynewt-nimble/apps/bleprph/src/main.c b/src/libs/mynewt-nimble/apps/bleprph/src/main.c
new file mode 100644
index 0000000..66f9bac
--- /dev/null
+++ b/src/libs/mynewt-nimble/apps/bleprph/src/main.c
@@ -0,0 +1,359 @@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+
+#include <assert.h>
+#include <string.h>
+#include <stdio.h>
+#include <errno.h>
+#include "os/mynewt.h"
+#include "bsp/bsp.h"
+#include "hal/hal_gpio.h"
+#include "console/console.h"
+#include "hal/hal_system.h"
+#include "config/config.h"
+#include "split/split.h"
+#if MYNEWT_VAL(BLE_SVC_DIS_FIRMWARE_REVISION_READ_PERM) >= 0
+#include "bootutil/image.h"
+#include "imgmgr/imgmgr.h"
+#include "services/dis/ble_svc_dis.h"
+#endif
+
+/* BLE */
+#include "nimble/ble.h"
+#include "host/ble_hs.h"
+#include "host/util/util.h"
+#include "services/gap/ble_svc_gap.h"
+
+/* Application-specified header. */
+#include "bleprph.h"
+
+static int bleprph_gap_event(struct ble_gap_event *event, void *arg);
+
+/**
+ * Logs information about a connection to the console.
+ */
+static void
+bleprph_print_conn_desc(struct ble_gap_conn_desc *desc)
+{
+ MODLOG_DFLT(INFO, "handle=%d our_ota_addr_type=%d our_ota_addr=",
+ desc->conn_handle, desc->our_ota_addr.type);
+ print_addr(desc->our_ota_addr.val);
+ MODLOG_DFLT(INFO, " our_id_addr_type=%d our_id_addr=",
+ desc->our_id_addr.type);
+ print_addr(desc->our_id_addr.val);
+ MODLOG_DFLT(INFO, " peer_ota_addr_type=%d peer_ota_addr=",
+ desc->peer_ota_addr.type);
+ print_addr(desc->peer_ota_addr.val);
+ MODLOG_DFLT(INFO, " peer_id_addr_type=%d peer_id_addr=",
+ desc->peer_id_addr.type);
+ print_addr(desc->peer_id_addr.val);
+ MODLOG_DFLT(INFO, " conn_itvl=%d conn_latency=%d supervision_timeout=%d "
+ "encrypted=%d authenticated=%d bonded=%d\n",
+ desc->conn_itvl, desc->conn_latency,
+ desc->supervision_timeout,
+ desc->sec_state.encrypted,
+ desc->sec_state.authenticated,
+ desc->sec_state.bonded);
+}
+
+/**
+ * Enables advertising with the following parameters:
+ * o General discoverable mode.
+ * o Undirected connectable mode.
+ */
+static void
+bleprph_advertise(void)
+{
+ uint8_t own_addr_type;
+ struct ble_gap_adv_params adv_params;
+ struct ble_hs_adv_fields fields;
+ const char *name;
+ int rc;
+
+ /* Figure out address to use while advertising (no privacy for now) */
+ rc = ble_hs_id_infer_auto(0, &own_addr_type);
+ if (rc != 0) {
+ MODLOG_DFLT(ERROR, "error determining address type; rc=%d\n", rc);
+ return;
+ }
+
+ /**
+ * Set the advertisement data included in our advertisements:
+ * o Flags (indicates advertisement type and other general info).
+ * o Advertising tx power.
+ * o Device name.
+ * o 16-bit service UUIDs (alert notifications).
+ */
+
+ memset(&fields, 0, sizeof fields);
+
+ /* Advertise two flags:
+ * o Discoverability in forthcoming advertisement (general)
+ * o BLE-only (BR/EDR unsupported).
+ */
+ fields.flags = BLE_HS_ADV_F_DISC_GEN |
+ BLE_HS_ADV_F_BREDR_UNSUP;
+
+ /* Indicate that the TX power level field should be included; have the
+ * stack fill this value automatically. This is done by assiging the
+ * special value BLE_HS_ADV_TX_PWR_LVL_AUTO.
+ */
+ fields.tx_pwr_lvl_is_present = 1;
+ fields.tx_pwr_lvl = BLE_HS_ADV_TX_PWR_LVL_AUTO;
+
+ name = ble_svc_gap_device_name();
+ fields.name = (uint8_t *)name;
+ fields.name_len = strlen(name);
+ fields.name_is_complete = 1;
+
+ fields.uuids16 = (ble_uuid16_t[]){
+ BLE_UUID16_INIT(GATT_SVR_SVC_ALERT_UUID)
+ };
+ fields.num_uuids16 = 1;
+ fields.uuids16_is_complete = 1;
+
+ rc = ble_gap_adv_set_fields(&fields);
+ if (rc != 0) {
+ MODLOG_DFLT(ERROR, "error setting advertisement data; rc=%d\n", rc);
+ return;
+ }
+
+ /* Begin advertising. */
+ memset(&adv_params, 0, sizeof adv_params);
+ adv_params.conn_mode = BLE_GAP_CONN_MODE_UND;
+ adv_params.disc_mode = BLE_GAP_DISC_MODE_GEN;
+ rc = ble_gap_adv_start(own_addr_type, NULL, BLE_HS_FOREVER,
+ &adv_params, bleprph_gap_event, NULL);
+ if (rc != 0) {
+ MODLOG_DFLT(ERROR, "error enabling advertisement; rc=%d\n", rc);
+ return;
+ }
+}
+
+/**
+ * The nimble host executes this callback when a GAP event occurs. The
+ * application associates a GAP event callback with each connection that forms.
+ * bleprph uses the same callback for all connections.
+ *
+ * @param event The type of event being signalled.
+ * @param ctxt Various information pertaining to the event.
+ * @param arg Application-specified argument; unuesd by
+ * bleprph.
+ *
+ * @return 0 if the application successfully handled the
+ * event; nonzero on failure. The semantics
+ * of the return code is specific to the
+ * particular GAP event being signalled.
+ */
+static int
+bleprph_gap_event(struct ble_gap_event *event, void *arg)
+{
+ struct ble_gap_conn_desc desc;
+ int rc;
+
+ switch (event->type) {
+ case BLE_GAP_EVENT_CONNECT:
+ /* A new connection was established or a connection attempt failed. */
+ MODLOG_DFLT(INFO, "connection %s; status=%d ",
+ event->connect.status == 0 ? "established" : "failed",
+ event->connect.status);
+ if (event->connect.status == 0) {
+ rc = ble_gap_conn_find(event->connect.conn_handle, &desc);
+ assert(rc == 0);
+ bleprph_print_conn_desc(&desc);
+
+#if MYNEWT_VAL(BLEPRPH_LE_PHY_SUPPORT)
+ phy_conn_changed(event->connect.conn_handle);
+#endif
+ }
+ MODLOG_DFLT(INFO, "\n");
+
+ if (event->connect.status != 0) {
+ /* Connection failed; resume advertising. */
+ bleprph_advertise();
+ }
+ return 0;
+
+ case BLE_GAP_EVENT_DISCONNECT:
+ MODLOG_DFLT(INFO, "disconnect; reason=%d ", event->disconnect.reason);
+ bleprph_print_conn_desc(&event->disconnect.conn);
+ MODLOG_DFLT(INFO, "\n");
+
+#if MYNEWT_VAL(BLEPRPH_LE_PHY_SUPPORT)
+ phy_conn_changed(CONN_HANDLE_INVALID);
+#endif
+
+ /* Connection terminated; resume advertising. */
+ bleprph_advertise();
+ return 0;
+
+ case BLE_GAP_EVENT_CONN_UPDATE:
+ /* The central has updated the connection parameters. */
+ MODLOG_DFLT(INFO, "connection updated; status=%d ",
+ event->conn_update.status);
+ rc = ble_gap_conn_find(event->conn_update.conn_handle, &desc);
+ assert(rc == 0);
+ bleprph_print_conn_desc(&desc);
+ MODLOG_DFLT(INFO, "\n");
+ return 0;
+
+ case BLE_GAP_EVENT_ADV_COMPLETE:
+ MODLOG_DFLT(INFO, "advertise complete; reason=%d",
+ event->adv_complete.reason);
+ bleprph_advertise();
+ return 0;
+
+ case BLE_GAP_EVENT_ENC_CHANGE:
+ /* Encryption has been enabled or disabled for this connection. */
+ MODLOG_DFLT(INFO, "encryption change event; status=%d ",
+ event->enc_change.status);
+ rc = ble_gap_conn_find(event->connect.conn_handle, &desc);
+ assert(rc == 0);
+ bleprph_print_conn_desc(&desc);
+ MODLOG_DFLT(INFO, "\n");
+ return 0;
+
+ case BLE_GAP_EVENT_SUBSCRIBE:
+ MODLOG_DFLT(INFO, "subscribe event; conn_handle=%d attr_handle=%d "
+ "reason=%d prevn=%d curn=%d previ=%d curi=%d\n",
+ event->subscribe.conn_handle,
+ event->subscribe.attr_handle,
+ event->subscribe.reason,
+ event->subscribe.prev_notify,
+ event->subscribe.cur_notify,
+ event->subscribe.prev_indicate,
+ event->subscribe.cur_indicate);
+ return 0;
+
+ case BLE_GAP_EVENT_MTU:
+ MODLOG_DFLT(INFO, "mtu update event; conn_handle=%d cid=%d mtu=%d\n",
+ event->mtu.conn_handle,
+ event->mtu.channel_id,
+ event->mtu.value);
+ return 0;
+
+ case BLE_GAP_EVENT_REPEAT_PAIRING:
+ /* We already have a bond with the peer, but it is attempting to
+ * establish a new secure link. This app sacrifices security for
+ * convenience: just throw away the old bond and accept the new link.
+ */
+
+ /* Delete the old bond. */
+ rc = ble_gap_conn_find(event->repeat_pairing.conn_handle, &desc);
+ assert(rc == 0);
+ ble_store_util_delete_peer(&desc.peer_id_addr);
+
+ /* Return BLE_GAP_REPEAT_PAIRING_RETRY to indicate that the host should
+ * continue with the pairing operation.
+ */
+ return BLE_GAP_REPEAT_PAIRING_RETRY;
+
+#if MYNEWT_VAL(BLEPRPH_LE_PHY_SUPPORT)
+ case BLE_GAP_EVENT_PHY_UPDATE_COMPLETE:
+ /* XXX: assume symmetric phy for now */
+ phy_update(event->phy_updated.tx_phy);
+ return 0;
+#endif
+ }
+
+ return 0;
+}
+
+static void
+bleprph_on_reset(int reason)
+{
+ MODLOG_DFLT(ERROR, "Resetting state; reason=%d\n", reason);
+}
+
+static void
+bleprph_on_sync(void)
+{
+ int rc;
+
+ /* Make sure we have proper identity address set (public preferred) */
+ rc = ble_hs_util_ensure_addr(0);
+ assert(rc == 0);
+
+ /* Begin advertising. */
+ bleprph_advertise();
+}
+
+/**
+ * main
+ *
+ * The main task for the project. This function initializes the packages,
+ * then starts serving events from default event queue.
+ *
+ * @return int NOTE: this function should never return!
+ */
+int
+main(void)
+{
+#if MYNEWT_VAL(BLE_SVC_DIS_FIRMWARE_REVISION_READ_PERM) >= 0
+ struct image_version ver;
+ static char ver_str[IMGMGR_NMGR_MAX_VER];
+#endif
+ int rc;
+
+ /* Initialize OS */
+ sysinit();
+
+ /* Initialize the NimBLE host configuration. */
+ ble_hs_cfg.reset_cb = bleprph_on_reset;
+ ble_hs_cfg.sync_cb = bleprph_on_sync;
+ ble_hs_cfg.gatts_register_cb = gatt_svr_register_cb;
+ ble_hs_cfg.store_status_cb = ble_store_util_status_rr;
+
+ rc = gatt_svr_init();
+ assert(rc == 0);
+
+#if MYNEWT_VAL(BLE_SVC_DIS_FIRMWARE_REVISION_READ_PERM) >= 0
+ /* Set firmware version in DIS */
+ imgr_my_version(&ver);
+ imgr_ver_str(&ver, ver_str);
+ ble_svc_dis_firmware_revision_set(ver_str);
+#endif
+
+#if MYNEWT_VAL(BLEPRPH_LE_PHY_SUPPORT)
+ phy_init();
+#endif
+
+ conf_load();
+
+ /* If this app is acting as the loader in a split image setup, jump into
+ * the second stage application instead of starting the OS.
+ */
+#if MYNEWT_VAL(SPLIT_LOADER)
+ {
+ void *entry;
+ rc = split_app_go(&entry, true);
+ if (rc == 0) {
+ hal_system_start(entry);
+ }
+ }
+#endif
+
+ /*
+ * As the last thing, process events from default event queue.
+ */
+ while (1) {
+ os_eventq_run(os_eventq_dflt_get());
+ }
+ return 0;
+}
generated by cgit v0.10.2 at 2026-01-22 08:05:33 (GMT)