Merge pull request #30 from JF002/nimble

Nimble

1 files changed, 109 insertions, 0 deletions

diff --git a/src/libs/mynewt-nimble/nimble/host/services/dis/syscfg.yml b/src/libs/mynewt-nimble/nimble/host/services/dis/syscfg.yml
new file mode 100644
index 0000000..b306d3b
--- /dev/null
+++ b/src/libs/mynewt-nimble/nimble/host/services/dis/syscfg.yml
@@ -0,0 +1,109 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+syscfg.defs:
+    BLE_SVC_DIS_DEFAULT_READ_PERM:
+        description: >
+            Defines default permissions for reading characteristics. Can be
+            zero to allow read without extra permissions or combination of:
+                BLE_GATT_CHR_F_READ_ENC
+                BLE_GATT_CHR_F_READ_AUTHEN
+                BLE_GATT_CHR_F_READ_AUTHOR
+            Set to '-1' to remove this characteristic.
+        value: -1
+    BLE_SVC_DIS_MODEL_NUMBER_READ_PERM:
+        description: >
+            Defines permissions for reading "Model Number" characteristics.
+            Can be set to BLE_SVC_DIS_DEFAULT_READ_PERM or use any of the
+            possible values defined for that setting.
+        value: 0
+    BLE_SVC_DIS_MODEL_NUMBER_DEFAULT:
+        description: >
+            Defines a default value for "Model number" if not set with
+            'ble_svc_dis_model_number_set'.
+        value: '"Apache Mynewt NimBLE"'
+    BLE_SVC_DIS_SERIAL_NUMBER_READ_PERM:
+        description: >
+            Defines permissions for reading "Serial Number" characteristics.
+            Can be set to BLE_SVC_DIS_DEFAULT_READ_PERM or use any of the
+            possible values defined for that setting.
+        value: MYNEWT_VAL(BLE_SVC_DIS_DEFAULT_READ_PERM)
+    BLE_SVC_DIS_SERIAL_NUMBER_DEFAULT:
+        description: >
+            Defines a default value for "Serial number" if not set with
+            'ble_svc_dis_serial_number_set'.
+        value: NULL
+    BLE_SVC_DIS_HARDWARE_REVISION_READ_PERM:
+        description: >
+            Defines permissions for reading "Hardware Revision" characteristics.
+            Can be set to BLE_SVC_DIS_DEFAULT_READ_PERM or use any of the
+            possible values defined for that setting.
+        value: MYNEWT_VAL(BLE_SVC_DIS_DEFAULT_READ_PERM)
+    BLE_SVC_DIS_HARDWARE_REVISION_DEFAULT:
+        description: >
+            Defines a default value for "Hardware revision" if not set with
+            'ble_svc_dis_hardware_revision_set'.
+        value: NULL
+    BLE_SVC_DIS_FIRMWARE_REVISION_READ_PERM:
+        description: >
+            Defines permissions for reading "Firmware Revision" characteristics.
+            Can be set to BLE_SVC_DIS_DEFAULT_READ_PERM or use any of the
+            possible values defined for that setting.
+        value: MYNEWT_VAL(BLE_SVC_DIS_DEFAULT_READ_PERM)
+    BLE_SVC_DIS_FIRMWARE_REVISION_DEFAULT:
+        description: >
+            Defines a default value for "Software revision" if not set with
+            'ble_svc_dis_firmware_revision_set'.
+        value: NULL
+    BLE_SVC_DIS_SOFTWARE_REVISION_READ_PERM:
+        description: >
+            Defines permissions for reading "Software Revision" characteristics.
+            Can be set to BLE_SVC_DIS_DEFAULT_READ_PERM or use any of the
+            possible values defined for that setting.
+        value: MYNEWT_VAL(BLE_SVC_DIS_DEFAULT_READ_PERM)
+    BLE_SVC_DIS_SOFTWARE_REVISION_DEFAULT:
+        description: >
+            Defines a default value for "Software revision" if not set with
+            'ble_svc_dis_software_revision_set'.
+        value: NULL
+    BLE_SVC_DIS_MANUFACTURER_NAME_READ_PERM:
+        description: >
+            Defines permissions for reading "Manufacturer name" characteristics.
+            Can be set to BLE_SVC_DIS_DEFAULT_READ_PERM or use any of the
+            possible values defined for that setting.
+        value: MYNEWT_VAL(BLE_SVC_DIS_DEFAULT_READ_PERM)
+    BLE_SVC_DIS_MANUFACTURER_NAME_DEFAULT:
+        description: >
+            Defines a default value for "Manufacturer name" if not set with
+            'ble_svc_dis_manufacturer_name_set'.
+        value: NULL
+    BLE_SVC_DIS_SYSTEM_ID_READ_PERM:
+        description: >
+            Defines permissions for reading "System ID" characteristics.
+            Can be set to BLE_SVC_DIS_DEFAULT_READ_PERM or use any of the
+            possible values defined for that setting.
+        value: MYNEWT_VAL(BLE_SVC_DIS_DEFAULT_READ_PERM)
+    BLE_SVC_DIS_SYSTEM_ID_DEFAULT:
+        description: >
+            Defines a default value for "System ID" if not set with
+            'ble_svc_dis_manufacturer_name_set'.
+        value: NULL
+    BLE_SVC_DIS_SYSINIT_STAGE:
+        description: >
+            Sysinit stage for the device information BLE service.
+        value: 303