Merge branch 'develop' into HEAD

1 files changed, 7 insertions, 7 deletions

diff --git a/doc/filesInReleaseNotes.md b/doc/filesInReleaseNotes.md
index f48a0c1..1a37fef 100644
--- a/doc/filesInReleaseNotes.md
+++ b/doc/filesInReleaseNotes.md
@@ -1,16 +1,16 @@
 # Using the releases
-For each new *stable* version of Pinetime, a [release note](https://github.com/JF002/InfiniTime/releases) is created. It contains a description of the main changes in the release and some files you can use to flash the firmware in your Pinetime.
+For each new *stable* version of IniniTime, a [release note](https://github.com/JF002/InfiniTime/releases) is created. It contains a description of the main changes in the release and some files you can use to flash the firmware to your Pinetime.
 
 This page describes the files from the release notes and how to use them.
 
-**NOTE :** the files included in different could be different. This page describes the release note of [version 0.7.1](https://github.com/JF002/InfiniTime/releases/tag/0.7.1), which is the version that'll probably be pre-programmed at the factory for the next batch of Pinetime devkits.
+**NOTE :** the files included in different Releases could be different. This page describes the release notes of [version 0.7.1](https://github.com/JF002/InfiniTime/releases/tag/0.7.1), which is the version that is pre-programmed for the last batches of pinetimes but will be replaced with [1.0.0](https://github.com/jF002/infiniTime/releases/tag/1.0.0) around june 2021.
 
-## Files included in the release note
+## Files included in the release notes
 
 ### Standalone firmware
-This firmware is standalone, meaning that it does not need a bootloader to actually run. It is intended to be flash at offset 0, meaning it will erase any bootloader that might be present in memory.
+This firmware is standalone, meaning that it does not need a bootloader to actually run. It is intended to be flashed at offset 0, meaning it will erase any bootloader that might be present in memory.
 
- - **pinetime-app.out** : Output file of GCC containing debug symbols, useful is you want to debug the firmware using GDB.
+ - **pinetime-app.out** : Output file of GCC containing debug symbols, useful if you want to debug the firmware using GDB.
  - **pinetime-app.hex** : Firmware in Intel HEX file format. Easier to use because it contains the offset in memory where it must be flashed, you don't need to specify it.
  - **pintime-app.bin** : Firmware in binary format. When programming it, you have to specify the offset (0x00) in memory where it must be flashed.
  - **pinetime-app.map** : Map file containing all the symbols, addresses in memory,...
@@ -18,7 +18,7 @@ This firmware is standalone, meaning that it does not need a bootloader to actua
 **This firmware must be flashed at address 0x00 in the main flash memory**
 
 ### Bootloader
-The bootloader  is maintained by [lupyuen](https://github.com/lupyuen) and is a binary version of [this release](https://github.com/lupyuen/pinetime-rust-mynewt/releases/tag/v5.0.4).
+The bootloader is maintained by [lupyuen](https://github.com/lupyuen) and is a binary version of [this release](https://github.com/lupyuen/pinetime-rust-mynewt/releases/tag/v5.0.4).
 
  - **bootloader.hex** : Firmware in Intel HEX file format.
  
@@ -38,7 +38,7 @@ This firmware is a small utility firmware that writes the boot graphic in the ex
 ### Firmware with bootloader
 This firmware is intended to be used with our [MCUBoot-based bootloader](../bootloader/README.md).
 
- - **pinetime-mcuboot-app-image.hex** : Firmware wrapped into an MCUBoot image. This is **the** file that must be flashed **@ 0x8000** into flash memory. If the [bootloader](../bootloader/README.md) has been successfully programmed, it should run this firmware after the next reset.
+ - **pinetime-mcuboot-app-image.hex**: Firmware wrapped into an MCUBoot image. This is **the** file that must be flashed at **0x8000** into the flash memory. If the [bootloader](../bootloader/README.md) has been successfully programmed, it should run this firmware after the next reset.
 
 The following files are not directly usable by the bootloader: