Add example scripts to generate mcuboot image, dfu file and program them with openocd.

4 files changed, 43 insertions, 0 deletions

diff --git a/bootloader/booloader_app_jlink.ocd b/bootloader/booloader_app_jlink.ocd
new file mode 100644
index 0000000..6624383
--- /dev/null
+++ b/bootloader/booloader_app_jlink.ocd
@@ -0,0 +1,34 @@
+# This script programs the bootloader and the firmware application using J-Link debugger.
+
+gdb_flash_program enable
+gdb_breakpoint_override hard
+
+$_TARGETNAME configure -event reset-init {
+    # Arm Semihosting is used to show debug console output and may only be enabled after init event.  We wait for the event and enable Arm Semihosting.
+    echo "Enabled ARM Semihosting to show debug output"
+    arm semihosting enable
+}
+
+# Connect to the device.
+init
+
+echo "Stopping..."
+reset
+halt
+echo ""
+
+# Flashing Bootloader
+echo "Flashing bootloader..."
+program ./mynewt_nosemi_4.1.7.elf  verify 0x00000000
+
+# Flashing Application
+echo "Flashing application..."
+program ./image.bin verify 0x00008000
+echo ""
+
+# Restart the device and start the bootloader.
+echo "Restarting..."
+reset
+echo ""
+
+echo "**** Done! Press Ctrl-C to exit..."
diff --git a/bootloader/create_dfu.sh b/bootloader/create_dfu.sh
new file mode 100755
index 0000000..078234e
--- /dev/null
+++ b/bootloader/create_dfu.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+
+adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application image.bin dfu.zip
\ No newline at end of file
diff --git a/bootloader/create_image.sh b/bootloader/create_image.sh
new file mode 100755
index 0000000..14350c0
--- /dev/null
+++ b/bootloader/create_image.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+
+/home/jf/nrf52/mcuboot/scripts/imgtool.py  create --align 4 --version 1.0.0 --header-size 32 --slot-size 475136 --pad-header /home/jf/nrf52/Pinetime/cmake-build-release/src/pinetime-mcuboot-app.bin image.bin
\ No newline at end of file
diff --git a/bootloader/flash_bootloader_app.sh b/bootloader/flash_bootloader_app.sh
new file mode 100755
index 0000000..02c7b94
--- /dev/null
+++ b/bootloader/flash_bootloader_app.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+
+/home/jf/nrf52/openocd-code/src/openocd  -s /home/jf/nrf52/openocd-code/tcl/ -c "tcl_port disabled" -c "gdb_port 3333" -c "telnet_port 4444" -f /home/jf/nrf52/openocd-code/tcl/interface/jlink.cfg -c "transport select swd" -f /home/jf/nrf52/openocd-code/tcl/target/nrf52.cfg -f booloader_app_jlink.ocd
\ No newline at end of file