summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-15drivers: cst816s: Handle a failure to sleepDaniel Thompson
Exceptions on th sleep path more or less kill the device (it is half alseep and is not on... but not off enough for the power button to work. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-08-15gadgetbridge: Disable the not-implemented messageDaniel Thompson
Currently the not-implemented message provokes GadgetBridget into issuing lots of annoying toaster messages. It's still useful for debugging but let's disable it by default. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-08-15wasp: Introduce a NEXT eventDaniel Thompson
This is useful for devices that do not have touchscreens. It can be used to cycle through the quick ring and to check out notifications. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-08-15k9: Disable safe-modeDaniel Thompson
Currently the K9 is wedged in safe-mode. Oops! Fix this. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-08-15k9: watch.py.in: Fix backlightDaniel Thompson
Currently the backlight is permanently on at its lowest level. The backlight is so dim that this is almost impossible to detect. I only found it when lying in a field in total darkness and observing that the screen wasn't quite as black as I expected. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-08-15README: Fix typoMichael Scherer
[daniel@redfelineninja.org.uk: The patch author did not respond to a request for a Signed-off-by but since there's no way a typo correction is copyrightable (and I don't want the project to continue to look illiterate) then I have provided my own as a substitute.] Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-08-15contributing: Added a git quick fix howtoDaniel Thompson
Suggested-by: Panagiotis Vasilopoulos <hello@alwayslivid.com> Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-08-14Merge pull request #61 from AlwaysLivid/shebang-changeDaniel Thompson
wasptool: Change Python shebang to ensure compatibility
2020-08-14Merge branch 'master' of https://github.com/daniel-thompson/wasp-osDaniel Thompson
2020-08-14docs: Add a contributors guideDaniel Thompson
Mostly this is adopting policies (both DCO and Contributor Covenent) that are commonly used by other projects... Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-08-14wasptool: Change Python shebang to ensure compatibilityPanagiotis Vasilopoulos
- Certain Unix-like systems (such as *BSD systems) do not use /usr/bin/python3 as the default Python path. This small change will ensure a higher degree of compatibility. Signed-off-by: Panagiotis Vasilopoulos <hello@alwayslivid.com>
2020-08-09Merge pull request #48 from Siroj42/masterDaniel Thompson
Fix background color of strings.
2020-08-09k9: Add support for Senbono K9Daniel Thompson
The K9 is similar to the PineTime and P8 devices but does not appear to use the CST[78]16 touch screen controllers. At present the protocol is not known (readfrom yields all zeros, readfrom_mem provokes an exception) so we have a hugely limited interface consisting of the side button and the touchscreen interrupts (in other words we can treat the touchscreen like a second button). Works suprisingly well considering... Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-08-02draw565: Fix wrong background color of stringsSiroj42
Signed-off-by: Joris Warmbier <siroj42@t-online.de>
2020-08-02Makefile: Seperate the builds by boardDaniel Thompson
wasp-os is starting to developer proper support for multiple boards (currently other boards such as nitrogen and ds-d6 test builds and proof-of-concept stuff) then we need to start placing binaries for each device into seperate directories (other wise creating a binary distro won't work). Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-08-02Makefile: Clean up empty redirected file on failureDaniel Thompson
If the preprocessor fails for any reason then an empty or partially processed watch.py file is created which will satisfy the dependency checks in any later invocation of make which can silently break the build. Cleaning up on failure prevents this from happening. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-08-02tools: preprocess: Ensure we use python3 interpreterDaniel Thompson
Not being explicit about the correct python interpreter causes trouble on distros that do not alias python to python3 and/or that do not install python2 by default. Reported by: Mirko Covizzi <mrkcvzz@gmail.com> Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-31docs: install: Move Building from source into the install guideDaniel Thompson
Direct links to the install guide mean some people are reading the docs but never see the main docs index and, as a result, don't find the instructions on how to build from source. Let's fix that! Fixes: #49 Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-30TODO: Update to match latest updatesDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-30install: Improve formating, add links and other good stuffDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-29install: Initial attempt at an install guideDaniel Thompson
More work needed... but a step up from the current text in the README. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-27res: Add underlying png images for recently added icons.Daniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-27boards: p8: Full support for Colmi P8Daniel Thompson
All the components (bootloader, reloader, micropython) has P8 support added some time back but without full integration at the wasp-os level. Let's add it! Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-26wasptool: Add support for selecting devices by name and MAC addressDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-26Makefile: Allow installation via DaFlasherDaniel Thompson
Generate a .zip file that works with SoftDevice 2.0.1 (still looking for the recipe that works with 5.0), fix up the bootloader to work with DaFlasher and add an extra feature in micropython to cope better. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-24StatusBar: Rename and add BLE connection status iconDaniel Thompson
Notifier was a dumb name so make it better. Now that we have a decent name it should be obvious how to handle the BLE connection status icon! Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-19Introduction basic notification supportDaniel Thompson
This requires a modified version of Gadgetbridge and currently works by implementing the BangleJS protocol. In Gadgetbridge ensure "Sync time" is *not* set and choose "Don't pair" when adding the PineTime device.
2020-07-12README: Update with the latest videoDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-09boards: simulator: Swap up/down swipe detectionDaniel Thompson
Fix swipe detection so it matches the real device. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-09docs: Introduce project logoDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-07-07simulator: Provide a special main.py for the simulatorDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-30wasp: Switch to scheduling from interruptDaniel Thompson
This has two useful properties. Firstly it means the watch will be maintained in the background, allowing the REPL to be used for notifications and other updates. Secondly it will save a little bit of power by reducing the work needed to handle spurious wake ups. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-27apps: stopwatch: Improve splits... and colour schemeDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-27boards: simulator: Add swipe detection and button supportDaniel Thompson
Currently the simulator relies on the keyboard to issue touchscreen gestures and button presses. Fix this by adding swipe detection and introducing a skin which gives us the capability to press the button using touchscreens or pointer devices. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-25README: Minor updates after reviewDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-25TODO: Update with latest progress against the roadmapDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-25boards: spinx: Fix the documentation generationDaniel Thompson
Currently the template app documentation will not generate. Fix that! Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-25ppg: Pull the PPG signal processing into a seperate libraryDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-24apps: heart: Initial heart rate detectionDaniel Thompson
The algorithm is fairly crude and the GUI is pretty simple but, if you stay still for 10 seconds, there's a good chance of an accurate pulse reading. Of course if you jog on the spot for ten seconds it more likely to calculate how many steps per minutes you are performing! Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-24simulator: Reverse the simulated PPG waveformDaniel Thompson
This avoids an implusive change in base value and makes the waveform a little more interesting. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-23Makefile: Fix builds when watch.py must be regeneratedDaniel Thompson
The paths passed to the preprocessor are currently wrong. Fix them! Fixes: 64afca1 ("Makefile: fix make sim (allow BOARD to be unset)") Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-22apps: heart: Introduce simple app for the heart rate sensorDaniel Thompson
The heart rate analysis step is still a work in progress but the current app allows us to visualize the the results of the signal conditioning. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-22drivers: hrs3300: Add a basic HRS3300 sensor driverDaniel Thompson
Add the driver and enable it on PineTime. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-22wasp: Switch to the faster fill routinesDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-22draw565: Optimize filled rectangle drawingDaniel Thompson
The original approach is *really* bad at drawing vertical lines (it ends up working a pixel at a time and works the chip select for each one. Optimize both the pixel fill and the use of the line buffer. The result is 20% faster for quarter screen fills, 3x for horizontal lines and 6x for vertical lines. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-22apps: testapp: Filled rectangle drawing benchmarksDaniel Thompson
Measure the performance of the quarter screen fill, horizontal lines and vertical lines. Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-20wasptool: Add support for binary uploadsDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-20wasptool: Fix --resetDaniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-20Makefile: Fix make sim (allow BOARD to be unset)Daniel Thompson
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2020-06-17micropython: Disable micro:bit filesystemDaniel Thompson
... and enable persistant code loading. Fixes: #37 Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
generated by cgit v0.10.2 at 2026-02-06 06:57:42 (GMT)