diff options
Diffstat (limited to 'doc/gettingStarted/ota-gadgetbridge.md')
| -rw-r--r-- | doc/gettingStarted/ota-gadgetbridge.md | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/doc/gettingStarted/ota-gadgetbridge.md b/doc/gettingStarted/ota-gadgetbridge.md new file mode 100644 index 0000000..971eaad --- /dev/null +++ b/doc/gettingStarted/ota-gadgetbridge.md @@ -0,0 +1,39 @@ +# Connecting to Gadgetbridge + +Launch Gadgetbridge and tap on the **"+"** button on the bottom right to add a new device: + + + +Wait for the scan to complete, your PineTime should be detected: + + + +Tap on it. Gadgdetbridge will pair and connect to your device: + + + +# Updating with Gadgetbridge + +## Preparation + +All releases of InfiniTime are available on the [release page of the GitHub repo](https://github.com/InfiniTimeOrg/InfiniTime/releases). + +Release files are available under the *Assets* button. + +You need to download the DFU of the firmware version that you'd like to install, for example `pinetime-mcuboot-app-dfu-1.6.0.zip` + +## Gadgetbridge + +Now that Gadgetbridge is connected to your PineTime, use a file browser application (I'm using Seafile to browse my NAS) and browse to the DFU file (image-xxx.zip) you downloaded previously. Tap on it and open it using the Gadgetbridge application/firmware installer: + + + +Read carefully the warning and tap **Install**: + + + +Wait for the transfer to finish. Your PineTime should reset and reboot with the new version of InfiniTime! + +Don't forget to **validate** your firmware. In the InfiniTime go to the settings (swipe right, select gear icon) and Firmware option and click **validate**. Otherwise after reboot the previous firmware will be used. + + |