diff options
| author | JF <jf@codingfield.com> | 2022-01-07 16:31:01 (GMT) |
|---|---|---|
| committer | Gitea <gitea@fake.local> | 2022-01-07 16:31:01 (GMT) |
| commit | adc7909c9823c5cd9fc9888a84e84f9182b9088f (patch) | |
| tree | 778abfb7792fb7e58e3ec4408c9e56444f383e25 /doc/openOCD.md | |
| parent | cfef0131b7b1bb83c81db417c43d6d499594125f (diff) | |
| parent | 26ae828e393d28390c5ea718bec9d4c1a96435ac (diff) | |
Merge branch 'develop' of JF/PineTime into master
Diffstat (limited to 'doc/openOCD.md')
| -rw-r--r-- | doc/openOCD.md | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/doc/openOCD.md b/doc/openOCD.md index b3661ce..df24b30 100644 --- a/doc/openOCD.md +++ b/doc/openOCD.md @@ -1,12 +1,12 @@ # OpenOCD and STLink OpenOCD (**Open O**n **C**hip **D**ebugger) is an open source tool that interfaces with many SWD/JTAG debugger to provide debugging and *in-system* programming for embedded target devices. -It supports the **NRF52** (the CPU of the PineTime) and the **STLinkV2**, a cheap SWD debugger. +OpenOCD supports the **NRF52** (the CPU of the PineTime) and the **STLinkV2**, a cheap SWD debugger. -It works on X86 computers, as well as ARM/ARM64 computers and SBC (like the RaspberryPi and Pine64 Pinebook Pro) ! +OpenOCD works on X86 computers, ARM/ARM64 computers, and SBCs (like the RaspberryPi and Pine64 Pinebook Pro)! ## Installation -We will build OpenOCD from sources, as packages from Linux distributions are most of the time outdated and do not support the NRF52 correctly. +We will build OpenOCD from sources, as packages from Linux distributions are most of the time outdated and do not support the NRF52 properly. - Fetch the sources from GIT, and build and install it: @@ -27,7 +27,7 @@ sudo cp contrib/60-openocd.rules /etc/udev/rules.d/ sudo udevadm control --reload-rules ``` - - You can now plug your STLinkV2 in a USB port and run OpenOCD to see if it's working correctly: + - You can now plug your STLinkV2 into a USB port and run OpenOCD to see if it's working correctly: ``` $ openocd -f interface/stlink.cfg -f target/nrf52.cfg @@ -63,7 +63,7 @@ gdb_breakpoint_override hard source [find target/nrf52.cfg] ``` -This file specifies to OpenOCD which debugger and target it will be connected to.. +This file specifies to OpenOCD which debugger and target it will be connected to. Then, we use various *user files* to use OpenOCD to flash InfiniTime binary files. |